Infrastructure & Communications LabOffline policy worksheet

Guest Wi-Fi / planning

Voucher policy planner

Work out how many guest passes you might need, distinguish total redemptions from simultaneous devices, and export a policy worksheet. No passwords, real vouchers or network changes are made.

Not a controller or a voucher issuer. Every input is a user assumption, including simultaneous devices per pass and whether data caps reset on each redemption. Actual UniFi, MikroTik and other platforms differ by version, configuration and policy. Confirm guest isolation, captive portal settings, terms and local rules before enabling access.
Guest pass assumptions
Choose a clearly labeled example, then edit any field. Nothing is saved or transmitted.

How many access passes you intend to issue; not generated here.

Your assumed peak connected guest devices, not unique visitors.

Hypothetical policy limit; verify controller support and actual enforcement.

Lifetime uses, NOT extra simultaneous devices.

Assumed maximum full-session length; controller timing semantics may differ.

0 means no modeled data quota. Per-use semantics are an assumption.

Choose a JSON worksheet exported by this planner (64 KiB maximum). Validation happens only in your browser. Nothing is uploaded, issued or applied automatically.

Modeled policy capacity
Derived arithmetic from your assumptions, not verified platform limits.
Modeled peak covered
Total possible redemptions
40
Simultaneous device slots
40
Vouchers for peak
30
Extra vouchers needed
0
Unused modeled slots
10
Maximum full-session hours
80

Data quota upper bound

20 GB

Assumes every permitted redemption consumes its full data quota, using decimal GB (1 GB = 1,000 MB). This is not an expected traffic forecast.

Your entered assumptions cover the assumed peak of 30 devices mathematically, with 10 unused modeled slots. Check actual controller session and redemption semantics before relying on it.

Compare policy assumptions

Save a valid worksheet as a baseline, then edit assumptions or import another worksheet. Both scenarios stay in this tab; no controller or network is contacted.

No baseline saved yet. Save a valid scenario to compare changes in capacity and shortfall.

Why these numbers?

Redemptions = passes × total uses per pass. Simultaneous slots = passes × the smaller of (remaining assumed uses, configured simultaneous-device limit). This worksheet optimistically assumes no earlier uses have been consumed. Required passes = ceiling(peak devices ÷ effective slots per pass). These are different limits: repeat use does not automatically increase concurrent capacity.

Verified reference: UniFi Hotspots and Captive Portals documents vouchers with time, bandwidth and data limits. MikroTik HotSpot documentation describes session-timeout, rate limits and shared users. Neither reference verifies that these generic worksheet assumptions map directly to your controller.

Next: check controller firmware and voucher policy support, guest isolation, and WAN/guest capacity. For actual code issuance, guest authorization or printed passes, use your authorized controller's supported workflow. No PDF output is offered until official pdfcn generation is implemented and tested.